This is more of a parts list than anything else. What you'll need to do to do this swap. This is not a physical how-to for doing the swap.

Copied and pasted from WWW.J-BODY.ORG∞

• Since Ive done this swap but from a 97 2.2 ohv. here is what you will need for a 00+
• .
• *Transmission
• *Engine (obviously)
• *Engine Harness
• *ECU or reflash if it is possible
• *Ecotec Upper Motor Mount
• *Ecotec Radiator (my old 97 2.2 radiator was not as thick as this one)
• *Radiator Hoses
• .
• (should be able to keep current BCM module)
• Axles should work for the different trans if it is an auto (havent experimented with 5 speed yet)
• .
• You 00+ guys have it easier to do the swap considering you dont have to swap out the fuel system. Otherwise you can do what I did and replace everything if its 95-99. Suncavi got his running with the old fuel tank setup for pre 00 but his gas gauge isnt reading it properly. Thats why I opted to swap my 97 to the 00+ gas tanks and put the 00+ wiring in my car. Ran good till I put a hole in the block
• .
• Any more questions feel free to email me at streetrcn22@aol.com∞ Im not on here too often so you would have a better chance catching me on AOL.